1 ? nic components corp. www.niccomp.com www.lowesr.com www.rfpassives.com www.smtmagnetics.com speci cations are subject to change ceramic disc capacitors ncd series class iii semiconductor type features ? stable temperature characteristics ? high volumetric efficiency ? economically priced ? available with formed leads and on tape for automatic .. insertion specifications percent of capacitance change temperature characteristics y5r y5s y5t y5v operating temperature range -30c ~ +85c standard tolerance 20% (m) capacitance change over temperature range 20% 22% -33% ~ +22 -82% ~ +20% dissipation factor maximum 8% insulation resistance 12vdc = 0.004megohms 16vdc = 1megohm working voltage range 12vdc ~ 50vdc dielectric withstanding voltage (test voltage) 1.25 times rated voltage for not less than 1 second, 50ma maximum test conditions 1khz, 0.5v 0.1vrms, +25c *see part number system for details
2 ? nic components corp. www.niccomp.com www.lowesr.com www.rfpassives.com www.smtmagnetics.com speci cations are subject to change ceramic disc capacitors standard products and maximum diameter (mm) by t.c. and voltage ncd series class iii nic reserves the right to request minimum quantities on certain values body thickness 2 ~ 4mm dependent on cv lead diameter 0.6mm is standard (bulk only) (bulk and taped styles) 23 min. 5 max. s j style 1.5+0.2 4.7 + 1 5 max. s d style 1.5+0.2 k style 23 min. 5 max. 1.5+0.2 s e style 4.7 + 1 5 max. 1.5+0.2 s 23 min. 2 max. s low voltage 100vdc & below standard 500vdc & up 23 min. 3 max. s cap. ( f) y5r/y5s y5t y5v working voltage (vdc) 12 16 25 50 12 16 25 50 12 16 25 50 0.01 6 6 6 666665555 0.022 7 7 7 777786666 0.033 7 7 7 777796667 0.047 9 9 9 977796667 0.068 10 10 10 10 8 8 8 12 7777 0.1 10101012101010127778 0.22 - -------101010- lead spacing (mm) - s body diameter standard bulk standard t&r optional bulk mm (inches) optional t&r mm (inches) 5 ~ 11 6.35 0.8 5.0 0.8 5.0 0.8 (0.200ls) 2.5 0.8 (0.100ls) >12 6.35 0.8 5.0 0.8 7.5 0.8 (0.295ls) 7.5 0.8 (0.295ls) 10.0 0.8 (0.395ls) 10.0 0.8 (0.395ls) ncd 104 m 16 y5t tr j optional packaging tr = taped and reel tb = tape and box (ammo) optional lead style c = cut lead d = inside kink (short leads) e = outward kink (short leads) j = inside kink (long leads) k = outward kink (long leads) temperature coef cient working voltage dc tolerance code c = 0.25pf k = 10% d = 0.5pf m = 20% j = 5% z = + 80% / - 20% capacitance code, expressed in pfd, first two digits are signi cant, third digit is no. of zeros. ?r? indicates decimal for under 10pfd. series rohs compliant f .100ls optional lead space (ls) and/or lead length (ll) in inches
3 ? nic components corp. www.niccomp.com www.lowesr.com www.rfpassives.com www.smtmagnetics.com speci cations are subject to change ceramic disc capacitors taping speci cations dimensions (mm) symbol d max. d p p 0 p 1 p 2 sh h 0 h 1 d wl t h value < 12 0.6 12.7 12.7 5.1 6.35 2.5 20.0 applies to parts with crimped leads 16.0 32.25 max. 4.0 18.0 11.0 max. 0.6 0.0 3.85 5.0 3.18 6.35 >12 ~ 23 0.6 or 0.8* 25.4 8.95 12.7 7.5 h max. + d max. 7.7 9.5 tolerance < 12 +0.06 -0.05 1.0 0.2 0.7 1.0 +0.8 -0.2 +1.5 -1.0 0.5 --- 0.2 0.5 --- 0.3 2.0 >12 ~ 23 1.5 1.3 *lead diameter dependent on capacitor diameter. contact nic for details straight leads <12mm diameter (a slight lead are may be present) d d h h 1 l w p 0 p p 2 p 1 s d crimped leads <12mm diameter inward (j) & outward (k) are available d d h 0 h 1 l w p 0 p p 2 p 1 s d h crimped leads >12 ~ 23mm diameter inward (j) & outward (k) are available d d h 0 h 1 l w p 0 p p 2 p 1 s d h straight leads >12 ~ 23mm diameter (a slight lead are may be present) d d h h 1 l w p 0 p p 2 p 1 s d h t
4 ? nic components corp. www.niccomp.com www.lowesr.com www.rfpassives.com www.smtmagnetics.com speci cations are subject to change ceramic disc capacitors taping speci cations ammo pack h 372 (14.64") l 377 (14.84") w 55 (2.16") acceptable to standard radial type cartridge. acceptable to standard radial type cartridge with a few extra accessories. d < 354 (13.93") b > 21 (.83") but < 30 (1.18") w < 55 (2.16") = = = = h l w reel w d b part number suffix for optional tape & reel or tape & box packaging tape & reel straight lead options trf = tape & reel with 5mm lead-space tr.100lsf = tape & reel with 2.0mm lead-space tr.250lsf = tape & reel with 6.35mm lead-space tr.300lsf = tape & reel with 7.5mm lead-space tr.375lsf = tape & reel with 9.5mm lead-space tape & reel crimped lead options (j = inward crimp, k = outward crimp) jtrf or ktrf = tape & reel with 5mm lead-space jtr.250lsf or ktr.250lsf = tape & reel with 6.35mm lead-space jtr.300lsf or ktr.300lsf = tape & reel with 7.5mm lead-space jtr.375lsf or ktr.375lsf = tape & reel with 9.5mm lead-space tape & box straight lead options tbf = tape & reel with 5mm lead-space tb.100lsf = tape & reel with 2.0mm lead-space tb.250lsf = tape & reel with 6.35mm lead-space tb.300lsf = tape & reel with 7.5mm lead-space tb.375lsf = tape & reel with 9.5mm lead-space tape & box crimped lead options (j = inward crimp, k = outward crimp) jtbf or ktbf = tape & reel with 5mm lead-space jtb.250lsf or ktbr.250lsf = tape & reel with 6.35mm lead-space jtb.300lsf or ktb.300lsf = tape & reel with 7.5mm lead-space jtb.375lsf or ktb.375lsf = tape & reel with 9.5mm lead-space notes: 1. the above lead-space options may not be available in all part diameters. contact nic for details. 2. inward "j style" and outward "k style" may not be available in all part diameters and voltages. contact nic for details.
|
